- Clear Com Ms-702 Manual
- Clear Com Ms 702 User Manual
MS-702 Two-Channel Main Station Instruction Manual
Figure 1: Front Panel
1.Talk Buttons: Each channel has an illuminated talk button for activating
- Locate and download user manuals, datasheets, brochures, firmware or software, or spare part list related to each product. Fully compatible with current and previous Clear-Com analog partyline systems. 2-Channel 1RU Main Station with. 4-Channel 2RU Main Station with.
- View and Download CLEAR-COM PS-702 instruction manual online. TWO-CHANNEL POWER SUPPLY. PS-702 Power Supply pdf manual download.
the microphone feed to that channel. Each talk button has a dual action
(momentary or latching feature) depending on how the button is pressed.
The MS-702 two-channel main station is a powerful, yet user-friendly unit that can serve as the heart of a Clear-Com system. We recommend that you read through this manual completely to better understand the functions of the MS-702. If you encounter a situation or have a question that this manual does. Clear-Com Encore TM MS-702 Two-Channel Main Station Power Supply & System Protection The MS-702 provides visual indication of power supply conditions. In the event of a short circuit or current overload on a channel, that channel will shut down while the other one continues to operate. As soon as the fault condition is.
If desired, the latching function for each channel can be defeated using
Encore, Ms-702. Read online or download PDF. Clear-Com MS-702 User Manual. We recommend that you read through this manual completely to better understand the functions of the MS-704 and RM-704. If you encounter a situation or have a question that this manual does not address, contact your dealer or call Clear-Com directly. Our applications support and service people are standing by to assist you.
the option switches on the rear panel. The following describes the various
•MOMENTARY: Press and hold the talk button while you are
•LATCHING: Press the talk button quickly to latch the talk function.
Press the button again to turn off the talk function.
•TALK INDICATION: The talk button will illuminate yellow
whenever the talk function is activated. The talk button illuminates
blue whenever the station is receiving power, but the talk function is
•CALL INDICATION: The call button will flash red when a call
•CALL ON TALK: Each channel can optionally be set to send a call
signal whenever you press the talk button. This function activates
program interrupts or any other call-activated function available on
other stations. Option switches on the rear panel enable this function.
•SPEAKER MUTE: If the front panel speaker is turned on, pressing
either talk button will reduce the speaker output level to avoid
The talk buttons can be labeled to indicate their function. To label the talk
1.Pull the talk button straight off.
2.Insert a small flat blade screwdriver into the slot between the cap and
the body of the button and gently twist. This will remove the cap.
4.Insert a 1/2 in. (1.27 cm) x 1/2 in. (1.27 cm) square of thin paper with
the needed description into the cap. Follow it up with the square white
diffuser and press the cap onto the body of the button. Press the
2.Call Buttons: Each channel has its own call button. Pressing a call button
will send a call signal on that channel. All the call lights on that channel
will flash. Call signals can also be sent while talking if required. The call
18
26
12
10
2
5
6
7
8